logixpro silo simulation exercise 2 solution

This represents 24 hours of varying weather conditions that affect the solar production of the panel for seven days. The weatherVariance function should create a 24x7 dimension matrix of random numbers between 0.8 and 1. After your computeEnergy function calculates how much energy is produced per day, it should call another user-defined function named weatherVariance. The amount of energy produced by a panel depends on the time of day and can be modeled by the mathematical formula below (a picture of the formula is attached), where t is an array of values from 1 to 24 hours.2. Write a function named computeEnergy that takes in as input the number of panels and computes the amount of energy produced in a typical day. This drastic increase in the use of solar panel technology is creating ample opportunities for engineers to evaluate the cost and efficiency of residential and commercial solar power systems.1. You will need to review the midterm solution and make changes to make it solve the final.MIDTERM QUESTION: (This question is solved and the solution is attached)On March 16th, 2021, CNBC reported that the Solar Energy Industries Association and Wood Mackenzie found that the solar industry added a record 19.2 gigawatts of new capacity during 2020, a 43% jump from 2019. I have completed the midterm part and the final is based on the midterm. This question is two parts midterm and a final. The START switch will have to be pressed to start the control system again.

If the STOP switch is pressed the system will stop, and the RUN light should go OFF.

Move the SELECTOR SWITCH back to position A, depress the START SWITCH to restart the system for the next 10 boxes.

To restart the process, move the SELECTOR SWITCH to position B to reset the counter.

Once 10 boxes have passed the PROX SENSOR, the process should shut down.

After the last 5 second interval is complete, the box should move away from the fill station, and the FULL light should go OFF, so the next box can arrive to be filled.

Once the box is full, the FULL light should come ON, and activate a second timer to wait an additional 5 seconds.The FILL light should go OFF when the box is full.

While the box is filling, the FILL light should flash ON/OFF at a 1 second interval.

The first box arrives at the filling station and activates a PROX SENSOR, then activates a 5 second timer to pause the process then starts filling the box after 5 seconds is complete.

When the START switch is pressed, the RUN light should come ON.

Follow all the Project Parameters listed, include an explanation of how your project works.ĭesign a program that will move boxes to a filling station while the SELECTOR SWITCH is in position A. The project will involve the Silo Simulator within LogixPro 500.

Logixpro silo simulation exercise 2 solution